Service Overview
Accurate Roof Leak Detection and Lasting Repair in Sturtevant, WI
A roof leak that has been "repaired" two or three times by different contractors without resolving is one of the most common situations our team encounters in Sturtevant, WI. The reason previous repairs failed is almost always that the visible water entry point was addressed without locating the actual source of the leak. Water can enter a roofing system through a failed flashing seam on the north side of a chimney, travel along a rafter for six feet, and appear as a ceiling stain directly above a first-floor window. Patching above the stain accomplishes nothing.
Our leak repair process begins with a structured diagnostic assessment designed to trace every water pathway from the interior staining point back to the actual entry location in the roofing system. We examine attic spaces, check moisture patterns in insulation and decking, assess all flashings, penetrations, and membrane seams in the suspected zone, and conduct controlled water testing when necessary to confirm our diagnosis before recommending a repair approach.
This diagnostic-first methodology is the reason our leak repairs in Sturtevant, WI consistently produce results where previous repairs have failed. We do not apply sealant to visible damage and hope it holds. We find the true source, address every contributing factor, and back our work with a documented warranty.
Common Roof Leak Sources We Identify and Repair
🍂Chimney Flashing Failures
Step, counter, and saddle flashing failures around chimneys are one of the leading sources of active roof leaks in Sturtevant, WI. We remove and fully reinstall failed chimney flashing systems.
🕐Pipe Boot and Penetration Seals
Rubber and lead pipe boots deteriorate over time, cracking and separating from the pipe to allow water entry. We replace all failed boot systems with durable alternatives.
🌚Skylight Frame Failures
Skylight curb flashing, counter-flashing, and glazing compound failures are a common source of active leaks. We assess all skylight components and repair at the actual failure points.
⛨Valley Flashing Deterioration
Open and closed valleys experience high water flow and are vulnerable to deterioration. We replace failed valley flashing systems with appropriate materials for the roofing type.
🏠Ridge and Hip Cap Failures
Wind-driven rain can enter through failed ridge or hip cap shingles. We identify and replace all failed ridge and hip components with properly fastened, sealed replacements.
🏤Eave and Wall Intersections
Step flashing at wall and roof intersections is a common failure point. We assess and reinstall step flashing throughout affected sections to restore weatherproofing at these junctions.
🔍 Our Leak Diagnostic Method
📊
Interior Pattern Analysis: We map interior staining and moisture patterns to estimate the probable entry zone on the roof surface above.
👀
Attic Space Inspection: We examine rafters, decking, and insulation for moisture trails, staining, and mold that indicate water travel pathways.
🔎
Exterior Component Assessment: Every flashing, penetration, and membrane seam in the suspected entry zone is inspected closely for failure points.
💧
Controlled Water Testing: Where visual inspection is inconclusive, we conduct controlled hose testing with a second technician inside to pinpoint the entry location precisely.